Roofing Compound (TDS)-C

Product Description : As a heavy brush coating for roof waterproofing and the resealing of existing roofs of mastic asphalt, roofing felt, corrugated iron and fibre/cement slates, lead, copper and zinc. Recommended where the threat of frost or rain precludes the use of an emulsion

Application : STIR WELL BEFORE USE.

Apply ALL WEATHER ROOFING COMPOUND by with each coat at right angles to the previous one, at a maximum rate of 0.70 litres per m 2 Allow each coat to dry thoroughly. Where necessary reinforce with either an open woven glass fibre membrane or an open mesh polyester membrane

Note: this material should only be applied to surfaces that are completely dry and great care should be taken to ensure that when applied to bitumen felt, no moisture is contained within the felt. In order to prolong the effective life of the dried coating, it is recommended that it can be overcoated with a suitable decorative solar reflective paint.

Limitations:
  • Do not use in areas where subsequent solvent contact is likely
  • Do not use for potable drinking water tanks.
  • Allow sufficient drying time between coats.
  • Bitumen Paint may bleed through any paints subsequently applied over it. Apply a primer recommended by the paint manufacturer before overpainting.

Storage Life: : Shelf life of this product is a minimum of 5 years under good storage conditions in original unopened containers.

Storage Conditions: Store under cover away from sources of heat and ignition. Keep containers sealed when not in use.

Packing size: 20 ltr.

View the Technical Data Sheet (TDS) for Roofing Compound (C). Explore detailed product specifications, waterproofing performance, application techniques, curing times, and coverage for long-lasting roof protection


Ready to Start?

If you have any questions, feedback, or inquiries, please feel free to reach out to us using the information below.

Ask Question