Linseed oil TDS-C

Product descriptionLinseed Oil is a natural oil used for interior wood finishing. It offers a satin finish resistant to water and alcohol. Over the years, when applied to light coloured wood, Linseed Oil gives wood an amber tone. Double boiled Linseed Oil is a blend of linseed oil & other processed oil which have been processed thru heating and blowing to produce Mixed Double Boiled Linseed Oil. Heating the oil causes it to polymerize and oxidize, effectively making it thicker and increasing the viscosity. Further a blend of driers is added to reduce its drying time. The added driers enable the oil to dry quickly and form a film on the surface. This oil is mainly used indoors. It is mainly used in the paint industry and construction industry.

PreparationSand evenly with 120 grit sandpaper and dust off the surface. Stir the content thoroughly. Dilute with 30% oil thinner.

Requirements for Linseed oil, Boiled, for paint
Characteristic Type 1 Type 2 Method of Test
Relative density at 30﮿C 0.931 to 0.945 0.929 to 0.943 6
Acid value, max 8 6 9
Saponification value 190 to 196 190 to 198 10
Unsaponifiable matter, percent by mass, ma 2-5 2-0 12
Drying time, max 18 hours 18 hours 15
Ash content, percent by mass, max 0.5 0.3 19
Application
  • Apply a generous oil coat with a stain pad, a cotton rag or a stain applicator. After 15 to 20 minutes, remove any excess oil by rubbing the surface with a cotton rag
  • Number of coats 3
Drying time
  • First coat: 12 hours
  • Other coats: 24 hours
  • Utilization: 2 days.
  • First damp cleaning: 14 days.

Covering: 120 to 230 sq. ft. / L

Project types: Interior structures, Floors, Planning, Furniture, Woodwork

Surface types : Wood, Cork, Stone, Concrete

Composition: Double boiled pale linseed oil

Residual disposal: Consult your municipality for proper disposal procedure Of this product residues.

Tools cleaning: Oil thinner

Compatibility: Compatible with most milk paints, chalk paints, mineral paints, stains and varnishes. It’s strongly recommended reading carefully the technical sheet of the technical sheet of the test to ensure the propriety and compatibility of the products

Application
  • Stain Pad
  • Stain Applicator
  • Cotton Rag.
  • Pieces.
Benefits
  • Creation of an amber Patina over time
  • Water resistant
  • Alcohol resistant.
  • Easy application.
  • Interior finishing.
VOC 0 g / L
  • Interior structures and woodwork: 3 to7 years
  • Floors: 1 to 3 years
  • Planning: 1 to 5 years
  • Furniture: 1 to 3 year.

Caution: Ventilate well. Wear protective gloves and safety glasses. DANGER OF COMBUSTION Keep out of reach of children. Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.

Maintenance: Clean with an oil- based soap. After 1 to3 years, if the finish becomes dull, apply one coat of oil and wipe off any excess.

Colour : Colourless

Aspect: Viscous liquid slightly amber

Storage: Keep in a hermetic container at room temperature. Conservation5 years.

Maintenance : Clean with an oil-based soap. After 1 to3 years, if the finish becomes dull, apply one coat of oil and wipe off any excess.

Explore the Technical Data Sheet (TDS) for Linseed Oil (C). Get detailed product specifications, application methods, drying times, and recommended uses for wood protection, metal preservation, and paint formulations Mumbai, Maharashtra, India


Ready to Start?

If you have any questions, feedback, or inquiries, please feel free to reach out to us using the information below.

Ask Question