Fire Retardant Paint-(TDS)-C

Product description: Proton Paints WB Fire Retardant Paint - 100 (For Wall) consists of a non-flammable base, special pigments and additives unlike normal paints which are based on flammable base. The dried film gives good protection against spread of fire for 2 hours on wall.

Recommended Use:
  • This product can be used on wood, gypsum, concrete. This Product has a varied application in industrial & commercial establishments. Some important areas of application are electrical cabins, kitchens, lifts studios, doors, railway compartments, server room etc.
Physical Character
Colour White
Finish Matt Finish
Theoretical Coverage4.7sq.mt. /liter @100 microns DFT for finish paint. (25°C /50% RH) *
Drying Time Surface Dry: 60 mins
Hard Dry: 8-10 Hours
Theoretical coverage capacity21 sq.mtr/ ltr @ 20 microns DFT
16.8 sq.mtr/ ltr @ 25 microns DFT
Over coating interval 8-10 hours
Shelf Life 6 months
Recommended total DFT Recommended total DFT to attain 2 hours fire retardant property on wall.
WB FR Primer 35 Microns (Volume Solids: 35+2)
WB FR Paint 100 Microns. (Volume Solids: 47+2) WB FR Clear - 15-30 micron
Application Details:

Application Method:
  • Brush, Airless spray.
Thinner:
  • DM Water 5 %. only if required for better brushing.
Surface Preparation:
  • Remove oil, grease and any other impurity. Make the surface dirt free. Remove any previous paint or loose coating from the surface. Remove any fungus or algae.
    New concrete / plaster should be allowed to cure completely for 28-30 days before application of Primer. Suitable measures should be taken in case of water seepage/ leakage problems. Holes, Dents and cracks should be filled properly and allowed to cure completely before application of primer. Make sure that the wood and concrete surface is treated to ensure good and permanent adhesion of the paint.
SPainting System:
  • One-two thick coat of WB Proton Paints Fire Retardant Primer followed by minimum two finishing thick coats of paint. Two coats of primer are recommended for porous surface followed by minimum two finishing coats of paint. More and thicker coats will provide more protection against fire and reduces the spread of fire. WB Fire Retardant Clear to be applied as top coat for better wash ability.

DIRECTIONS FOR USE

Surface Preparation:
  • Stability After Thinning: 24 Hours.
  • Don't apply if the ambient temperature is less than 10°C or if the temperature might drop to that level within 4 hours of application.
  • For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.
  • For application on rough surface or texture it is recommended to apply by brush so that the paint enters the grooves on the walls.
  • Complete the whole painting system before the start of Monsoon.
  • Do not use Chlorinated Water.
  • Make sure the surface is dry and moisture meter reads in Green Zone.
  • May cause serious eye damage.
  • May cause skin irritation
  • May cause an allergic skin reaction.
  • Toxic to aquatic life with long lasting effects.
  • Avoid release to the environment.
  • Collect spillage.
  • Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • Keep out of reach of children.
  • Avoid breathing vapour.
  • Wear protective gloves, eye or face protection.
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
  • IF ON SKIN: Wash with plenty of water. Do not use solvent thinners or White Spirit.
  • IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell.
  • Ensure maximum ventilation during application and drying.
  • When applying by brush or roller to large interior surfaces or in confined spaces, wear a suitable cartridge respirator or air-fed respiratory protective equipment.
  • Store in a well-ventilated place. Keep cool.
  • Store locked up
Disclaimer:
  • The data provided is as per the test carried out at the time of preparation. It is the user’s responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee, responsibility or liability will be accepted of the results as the condition in which the products are stored, handled and used by end user is beyond our control. For consistent shade on a project / site, make sure that the batch numbers on the paint containers are the same.

Access the Technical Data Sheet (TDS) for Fire Retardant Paint (C). Explore product specifications, fire-resistant properties, application techniques, drying times, and surface preparation for enhanced fire protection Mumbai, Maharashtra, India


Ready to Start?

If you have any questions, feedback, or inquiries, please feel free to reach out to us using the information below.

Ask Question