FOOD GRADE EPOXY PAINT

Product description: Two component polyamide cured Food Grade epoxy coating.

Physical Character
Gloss Semi Glossy
Volume Solids approx. 38%
Recommended DFT / coat35-40 microns
Theoretical coverage capacity 10.9 sq.mtr/ ltr @ 35 microns DFT
8.5 sq.mtr/ ltr @ 40 microns DFT
Drying time at 30°c Surface Dry: 1 hours
hard Dry: 12 hours
Full Cure: 7 days
Over coating interval at 30°c over coating interval at 30°c
Mixing Ratio (by volume) Base: hardener 4: 1
Direction for Use:

Surface Preparation:
  • Surfaces must be dry, clean and free from contaminants
  • ensure removal of dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating. oil and grease should be removed.
  • Suitable epoxy primer or intermediate; dry and free from all surface contamination. in case of aged epoxy coating, the surface should be sufficiently roughened prior to painting.
Application Condition:
  • Substrate temperature should be at least 3°c above dew point but not above 50°c..
  • relative humidity should be below 85%.
  • Good ventilation is required in confined areas to ensure proper curing.
Mixing:
  • Epoxy Finish Paint is supplied in two packs. Stir the base and hardener separately. if settling is observed in the base or hardener, loosen the settled material with the help of hand stirrer followed by power driven stirrer (at lower rPM) for quick homogenous mixing.
  • Mix hardener gradually into the base under continuous stirring as per the mixing ratio. once the unit has been mixed, it should be consumed within the working pot life. in case of part mixing (which should be avoided), close the lids of containers tightly to avoid contact with atmospheric moisture.
  • Thinner should be added after mixing the components and post the induction time. addition of excessive thinner will lead to reduced sag resistance.

Explore Food Grade Epoxy Paint for safe, non-toxic coatings. Discover product specifications, application methods, curing times, and recommended uses for food processing plants, water tanks, and kitchens.


Ready to Start?

If you have any questions, feedback, or inquiries, please feel free to reach out to us using the information below.

Ask Question