Bituminous Black Paint

Product descriptionAnti corrosive Bituminous Black Paint is a specially formulated anti-corrosive, waterproof, moisture resistant, for various structural elements. It is also used for concrete foundation. It can also use for other building materials that are exposed to aquatic environment. It is also a versatile coating alternative that can be used both below and above ground.

Chlorinated Rubber Coatings are algae controlled, and when cured, are nontoxic. They may be applied by brush, roller or spray. USE AREAS: The unique properties of recoat ability, durability and chemical resistance of Chlorinated Rubber Coatings are ideal for use in the following:
  • Swimming pools.
  • Water tanks.
  • Fish Ponds and Hatcheries
  • Silos & metal Treatment
  • Repaints of galvanized iron, clay and cement roof tiles
  • For Play Ground Floor (Anti-Skid)
TECHNICAL DATA
Colour Any RAL Shade
Gloss Eggshell
Recommended daft / coat 50-60 microns
Theoretical covering capacityApproximately 5– 8 m2 /L/ per coat
Drying time at 30°CSurface dry: 30 minute
Hard dry 8 hours
Flash point Not less than 27°C
Shelf life (cool & dry place)At least 12 months
BENEFITS:
  • Resistant to salt and chlorinated water, mould, algae and bacterial growth.
  • Ease of application under varied weather conditions.
  • One pack system with no mixing, reduced wastage, and long shelf life.
  • No special primer required for most applications.
  • Versatile, with wide recoat window, and excellent intercut adhesion.
  • Excellent UV stability.
  • Cured films are non-toxic, and not affected by the chemical balance of the pool water. Readily maintained and economical.

DurabilityExcellent.

ApplicationBy brush, roller or airless spray. Avoid heavy coats which may result in blistering. NEVER APPLY OVER DAMP SURFACES. Use caution when applying in very hot and/or sunny conditions as this makes application more difficult and may cause blistering. Apply a minimum of 3 coats, preferable 4 coats for best results.

THINNINGThinning is recommended only for the 1st coat, and then not to exceed 5% of Chlorinated Rubber Solvent (CRS) by volume. DRY TIME/RECOAT TIME: Touch dry in 1-2 hours. Recommended recoat, depending on temperature and humidity is 24 hours at the same time of day as the initial coat. Do not paint at temperatures below 10oC or above 30oC, or in humidity levels exceeding 85%.

COVERAGEApproximately 5– 8 m2 /L/ per coat, depending on the type of surface.

CLEAN-UP:Clean all equipment with Chlorinated Rubber Solvent (CRS).

POOL REFILLChlorinated Rubber must be allowed to fully dry before immersed in water. Full solvent release is 7-21 days depending on the weather conditions. Solvent release is not possible once the coating is immersed.

MAINTENANCEEnsure that you let your pool shop know that your pool has a Chlorinated Rubber coating, and our recommended pool chemistry.

Packing Size: 20 LTR

POOL CHEMISTRY:
  • Maintain pH between 7.4 and 7.8.
  • Maintain Total Alkalinity at a minimum of 140ppm, and preferably 160-180ppm.
  • Adjust Calcium Hardness above 250 ppm, ideally 280 > 320 ppm.
  • Keep chlorine levels at a minimum.
  • Minimize the use of acid where possible.

NoteBefore Application Water-proofing Is Must.

Anti-Corrosive Black Japan Bitumen Paint is a high-quality protective coating, ideal for safeguarding metal, wood, and masonry surfaces against rust and weathering. Known for its superior adhesion and durability, this bituminous paint provides a black, glossy finish that resists moisture, chemicals, and corrosion. Perfect for industrial equipment, pipelines, fences, and outdoor wooden structures, it ensures long-lasting protection in harsh environments. Mumbai, Maharashtra, India


Ready to Start?

If you have any questions, feedback, or inquiries, please feel free to reach out to us using the information below.

Ask Question